Pop-up UGV workshop · Lviv, Ukraine
Learn to build robots that matter.
A hands-on engineering workshop in Lviv. Learn electronics, firmware and 3D printing by turning old hoverboards into working unmanned ground vehicles.

Why we exist
Practical skills where they're needed most

Frog Shop is a pop-up workshop space in Lviv where people come to learn electronics, UGV building, 3D printing and how to use workshop tools.
We believe the best way to learn engineering is to build something real. Over the course you'll take a robot from a pile of salvaged parts to a vehicle that drives on radio control, and understand every part of it along the way.
You don't need a background in engineering. You need curiosity, patience and a willingness to get your hands dirty.
What you'll learn
From first solder joint to a working robot
Electronics & soldering
Read circuits, solder cleanly, crimp connectors and use a multimeter with confidence.
UGV building
Build a working ground robot from repurposed hoverboard parts: motors, controllers, battery and radio control.
Firmware & microcontrollers
Flash motor controller firmware and program ESP32 boards to talk to the hardware.
CAD & 3D printing
Design parts in FreeCAD, then slice and print them, from enclosures to wheels.
Power tools & woodworking
Work safely with hand and power tools in a real workshop setting.
Problem solving & teamwork
Work in small teams to design, build, test and fix, the way real engineering gets done.
The build
From hoverboard to UGV
1Strip it down
Take a hoverboard apart and harvest the hub motors, controller boards and battery.
2Understand it
Learn what each part of the controller does: power, MOSFETs, hall sensors and the chip that runs it all.
3Wire it up
Build a comms box with an ESP32 and radio receiver, and flash new firmware onto the motor boards.
4Print and assemble
Design and 3D print the body, fit the electronics and batteries, and drive it.
See it in action
Inside the workshop
Gallery
Work in progress












The course
How it works
Sign up
Fill in the short form below. It takes about two minutes.
Have a chat
We get in touch to talk through dates, your experience and what you want to learn.
Confirm your place
We send you the details: dates, what to bring, travel and accommodation guidance.
Build in Lviv
Join the workshop, learn by building, and leave with real skills.
FAQ
Questions you might have
Do I need any experience?
No. The course starts from the basics and you learn by building. If you already have skills, there is plenty to go further with.
Is it safe to travel to Lviv?
Lviv is in western Ukraine, far from the front line, but the whole country is affected by the war and air-raid alerts happen. Check your government's travel advice, and get insurance that covers Ukraine. We brief everyone on safety and shelter procedures on arrival.
How much does it cost?
There is a course fee for international volunteers. Fees are TBC; we'll confirm them when we contact you.
What about accommodation and travel?
You arrange your own travel and accommodation. We'll share recommendations for getting to Lviv and places to stay near the workshop.
What language is the course in?
English.
What should I bring?
Comfortable clothes you don't mind getting dirty, closed shoes and a laptop if you have one. We provide the tools, parts and safety gear.

Sign up
Register your interest
Tell us a little about yourself and when you could come. Signing up doesn't commit you to anything; we'll be in touch to talk it through.
src/site.config.tsWe only use your details to contact you about the course. See our privacy notice.